Sata Ffc Module; Removing The Sata Ffc Module; Installing The Sata Ffc Module - Dell Precision 3260 Compact Service Manual

3. Follow the procedure in

SATA FFC module

Removing the SATA FFC module

Prerequisites
1. Follow the procedure in
2. Remove the side cover.
3. Remove the processor
4. Remove the hard drive.
About this task
The following image(s) indicate the location of the SATA FFC module and provide a visual representation of the removal
procedure.
Steps
1. Remove the single screw (M3x5) that secures the SATA interposer module to the system board.
2. Open the latch and disconnect the SATA FFC from the connector on the system board.
3. Lift the SATA FFC module along with the SATA FFC out of the computer.

Installing the SATA FFC module

Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image(s) indicate the location of the SATA FFC module and provide a visual representation of the installation
procedure.
54 Removing and installing components
after working inside your
before working inside your
fan.
computer.
computer.