Steps
1. Open the PCI retainer latch and slide the PCIe bracket out of the computer.
2. Align the serial port PCIe card and slide it into the slot on the computer.
3. Ensure to check the serial port PCIe card assembly is placed within the structure limit.
4. Close the PCI retainer latch.
Next steps
1. Install the
side
cover.
2. Follow the procedure in
Removing the graphics card
Prerequisites
1. Follow the procedure in
2. Remove the
side
cover.
after working inside your
before working inside your
computer.
computer.
Removing and installing components
43