Items Supplied - Silvercrest SSM 1000 A2 Operating Instructions Manual

DANGER! Risk of injury
from scalding!
Do not open the Multi-Pot while it is
pressurised. Please take note of the
pressure indicator.
Do not move the device during opera-
tion.
Ensure that no body parts (e.g. hand or
arm) are above the following valve
openings when steam escapes from
these:
- from the pressure valve, when you are
opening it using the pressure valve
button,
- from the pressure indicator, particular-
ly during the heating phase.
WARNING! Risk of material
damage
The device must never be operated
when empty, in order to avoid overheat-
ing.
Never operate the Multi-Pot without the
pot.
Ensure that there is never too much or
too little water and food in the device.
Please note the instructions regarding
filling volume and the markings in the
pot (see "Markings in the pot / filling
volumes" on page 58).
Never place the device directly under a
wall-mounted cupboard, as steam es-
capes from the top and could damage
the furniture.
Never place the device on hot surfaces
(e.g. hot plates) or near to heat sources
or open fire.
Only use the original accessories.
The device is fitted with non-slip plastic
feet. As furniture is coated with a variety
of different varnishes and acrylics, and
treated with different cleaning agents, it
cannot be completely ruled out that
components are contained in some of
these substances that could damage
and soften the plastic feet. If necessary,
place a non-slip mat under the device.
Do not clean using sharp objects or
abrasive cleaning agents.
4.

Items supplied

1 base unit 13
1 pot 7
1 lid 5
1 condensed water tank 12
1 steamer insert 23
1 measuring beaker 24
1 rice spoon 22
1 soup spoon 21
1 mains power cable with mains plug 11
1 copy of the user instructions
Unpacking
1. Remove all parts from the packaging.
2. Check that all parts are present and in-
tact.
49
GB