Mitsubishi Electric MELSEC iQ-R Series User Manual page 158

FTP Setting
Series
MELSEC-Q series
MELSEC iQ-R series
Configure the details for access the FTP server.
By using this setting, it is possible to output logs to the FTP server.
By outputting the logs to the FTP server, the number of writes to the memory card can be mitigated.
Window
[Log]  [Log Output Setting]  [FTP Setting] tab
Displayed items
Item
IP Address
User
Password
Home Directory
Action After FTP Disconnection
Number of Retries After FTP Disconnection
Retry Delay At FTP Disconnection
FTP Error Notification
7 BASIC FUNCTIONS
156
7.17 Log Output
SECS/GEM communication software
Non-GEM version


Description
Configure the IP address of the FTP server.
Configure the username of the FTP account.
Configure the password of the FTP account.
Configure when the log will be output to a sub directory of the FTP account.
When left blank, the logs are output under the home directory of the FTP account.
Select the operation when the connection with the FTP server has been disconnected.
■MELSEC-Q series
• 0: Cancel log output: Logs are not output after FTP disconnection
• 1: Output to CF: Logs are output to the CF card after FTP disconnection.
■MELSEC iQ-R series
• 0: Cancel log output: Logs are not output after FTP disconnection
• 1: Output to SD: Logs are output to the SD memory card after FTP disconnection.
Specify the number of retries to connect with the FTP server after FTP disconnection.
Specify the delay time for connection retries after FTP disconnection.
The time is configured in increments of 10 (msec).

Select this checkbox to turn ON the notification relay to report when log output to the FTP server has
failed.
Furthermore, configure the device to be used as the notification relay.
Trigger Keep Time Hold the trigger relay for FTP error notification for the specified time.
The time is configured in increments of 10 (msec).
Status notification Select this checkbox to enable the trigger keep time.
Furthermore, switch OFF the FTP error notification relay by the SECS/GEM communication software
after reconnecting with the FTP server.
GEM version


GEM advanced version

