Event Definition - Mitsubishi Electric MELSEC iQ-R Series User Manual

Event definition

Define the event.
Window
Select an event at the "Event List" screen, right-click  shortcut menu [Modify]
Displayed items
Item
Enable Event
CEID
Event Name
Comment
Automatic Event Transmission
Sequencer Transmission Request
Monitor Response
Notify Secondary Reception
[Create Event] button
8 GEM COMPLIANT FUNCTIONS
226
8.14 Event Setting
Description
Select this checkbox to enable the event.
Configure the event ID based on communication specifications.
Configure the event name based on communication specifications.
Configure the comment.
Select this setting to set the timing of the occurrence of the event as the control event occurrence time of the SECS/
GEM communication software.
The control event of the SECS/GEM communication software must be configured.
Select to set the timing of the event occurrence as the detection time of the trigger from the programmable controller
CPU.
The sending request trigger relay, handshake specification, and trigger hold time must be configured.
Select this checkbox to perform response monitoring of S6F11 (event report sending) to be sent.
When this option is checked, W bit (response request) is added to the message to be transmitted.
Select this checkbox to detect whether the secondary message was received normally.
If the handshake unit of "Sequencer Transmission Request" is configured to "Handshake (for each message)",
configure a relay that is different from the sending request trigger.
Display the "Create Event" screen.
For details, refer to the following:
Page 227 Create event