Camera Event Trigger Setting - Mitsubishi Electric MELSEC iQ-R Series User Manual

Camera event trigger setting

The following shows the screen for setting a camera event trigger for each network camera set in the module extended
parameter.
Window
Click the [Camera Event Trigger Setting] button under "File Saving Trigger Setting."
Displayed items
Item
[Select All] button
[Deselect All] button
Module
Camera No.
Trigger
IP Address
Receiving Target
Event Notification
Event Comment
Precautions
• Even when changing system parameters, module parameters, or module extended parameters after setting each item in
the "Camera Event Trigger Setting" screen, the selection status in the "Trigger" column does not automatically change
accordingly. After changing these parameters, open this screen again to review the setting.
• Up to four camera recorder modules are displayed in ascending order of their slot numbers.
• If there are multiple camera recorder modules set as the main ones on the four ascending slot numbers, only the module on
the smallest slot number is displayed. The other modules are not displayed.
3 RECORDING SETTING
136
3.4 File Saving Trigger Setting
Description
Click this to select all the checkboxes in the "Trigger" column.
Click this to unselect all the checkboxes in the "Trigger" column.
The start I/O number, module name, and slot number of a camera recorder module are displayed.
The number of a network camera set in the module extended parameter is displayed.
Select the checkbox to specify an event notification from a network camera as a file saving trigger.
This checkbox can be selected when both of the following are satisfied:
• The camera event setting is configured in the module extended parameter.
• A network camera is set as a receiving target in the video data receiving target setting.
The IP address set for a network camera is displayed.
Whether a network camera is set as a receiving target in the video data receiving target setting is displayed.
The event notification set in the module extended parameter is displayed.
An event comment set in the module extended parameter is displayed.