Mitsubishi Electric MELSEC iQ-R Series User Manual page 118

*1 Does not appear in the following cases:
No camera recorder module is included in a project.
A recorder module and a camera recorder module set as the main module are included in a project, and the slot number of the camera
recorder module is larger than that of the recorder module.
*2 Displayed in red and a warning icon appears in any of the following cases:
An unconverted program is included in a target program when using 'device/label batch specification.'
The checkbox of "Include the Parameter" is selected and a project is unconverted when using 'device/label batch specification.'
A target program exists in the program setting in the CPU parameter but not in the navigation window when using 'device/label batch
specification.'
A local device and local label used in a program other than a target one are specified as sampling targets when using 'specify from the
device/label list.'
A global label (no device assigned) is specified as a sampling target but an unconverted program is included in a target program when
using 'specify from the device/label list.'
A module label (no device assigned) is specified as a sampling target but a project is unconverted when using 'specify from the device/
label list.'
A local device in an unconverted or a non-existent program is specified as a sampling target when using 'specify the device range.'
*3 Placing the cursor on the information icon (
*4 Displayed in red in any of the following cases:
An unconverted program is included in a target program when using 'device/label batch specification.'
The checkbox of "Include the Parameter" is selected and a project is unconverted when using 'device/label batch specification.'
A target program exists in the program setting in the CPU parameter but not in the navigation window when using 'device/label batch
specification.'
A local device and local label used in a program other than a target one are specified as sampling targets when using 'specify from the
device/label list.'
A global label (no device assigned) is specified as a sampling target but an unconverted program is included in a target program when
using 'specify from the device/label list.'
A module label (no device assigned) is specified as a sampling target but a project is unconverted when using 'specify from the device/
label list.'
A local device in an unconverted or a non-existent program is specified as a sampling target when using 'specify the device range.'
For the saving period, refer to the following:
Page 298 Period during which devices and labels can be saved, Page 299 Period during which video
data can be saved
Precautions
• If a sampling size exceeds the capacity of the buffer area setting for data sampling in the CPU parameter, the recording
function cannot be started and a recording setting error (error code: 3026H) occurs in a recorder module/camera recorder
module.
• If a warning icon appears in the sampling size and it persists even after converting a program, a non-existent program may
be set in the CPU parameter. Check the program registered in the program setting in the CPU parameter.
3 RECORDING SETTING
116
3.1 Recording Setting Screen
) displays the tooltip.