Mitsubishi Electric MELSEC iQ-R Series User Manual page 126

■Selection status of a device in the "Sampling Target" column
When changing the selection status of a device in the "Sampling Target" column, the statuses of other devices and labels in
the list that satisfy the following conditions also change at the same time. (This change also applies to devices and labels that
are hidden by filtering.)
- The device type is the same as a changed device.
- The device range is included in the range of a changed device.
- The device range partially overlaps with the range of a changed device, and devices in the remaining range are already
specified as sampling targets.
*1 For example, when changing the selection status of a device in the range of D0 in the "Sampling Target" column, those of devices in the
same range also change. (The selection statuses of devices in the ranges of D1, Z0, D0-D1, and D0Z0, etc. do not change.)
*2 For example, when changing the selection status of a device in the range of D0-D1 in the "Sampling Target" column, those of devices in
the ranges of D0, D1, and D0-D1 also change. (The selection statuses of devices such as those in the range of D1-D2 do not change.)
*3 The following devices and their contacts, coils, or current values are treated as other device types in this screen; therefore, the selection
status does not change at the same time. (For example, the selection status of a coil T0, TS0, TC0, or TN0 does not change at the same
time even if that of another one changes.)
- Timer
- Retentive timer
- Long timer
- Long retentive timer
- Counter
- Long counter
- Safety timer
- Safety retentive timer
- Safety counter
*4 For example, when selecting the checkbox of a device in the range of D0 in the "Sampling Target" column, those of devices in the range
of D0-D1 are also selected if D1 is already specified as a sampling target. (When unselecting the checkbox of D0, those of devices in the
range of D0-D1 are also unselected; however, D1 remains a sampling target.)
■When specifying a label (no device assigned) as a sampling target
Other labels in a project that satisfy the following conditions are also specified as sampling targets according to specified label
types.
Therefore, when changing the selection status in the "Sampling Target" column, the statuses of other labels in the list that
satisfy the following conditions also change at the same time. (This change also applies to labels that are hidden by filtering.)
Label type
• Global label
• Standard/safety shared global label
Local label
Module label
*1 Based on a local label specified as a sampling target, other local labels that satisfy their respective conditions are also specified as
sampling targets.
For examples of specifying other local labels when specifying a local label as a sampling target, refer to the following:
Examples of specifying other local labels when specifying a local label as a sampling target
3 RECORDING SETTING
124
3.3 Device/Label Sampling Setting
*4
Used in a program file (program
block)
Used in an FB file (FB)
*1*2*3
*1*2
Condition
All global labels (no device assigned)
• All local labels in a program file to which a local label belongs
• All local labels in an FB used in a program file to which a local label belongs
• All local labels in an FB file to which a local label belongs
• All local labels in a program file that uses an FB in an FB file to which a local label
*1
belongs
• All local labels in another FB file used in an FB file to which a local label belongs
All module labels (no device assigned)
*1
*1
*1
*1