Silvercrest SLQC 3.0 A1 Operating Instructions Manual page 15

NOTE
► The USB socket (green)
Quick Charge
with Quick Charge
If the connected device is compatible with this charging
standard, it will automatically be detected by the USB
charger . The USB charger supplies the appropriate
output voltage or output current so that the device can
be charged more quickly . Devices without this charging
standard can be charged normally using the USB
socket (green)
► The Qualcomm
is only effective if you are only using the USB socket
(green)
♦ Connect your device to the USB charger . Use the original
USB cable supplied with your device to optimise the
charging process .
♦ Plug the USB charger mains plug into a properly-installed
mains power socket .
♦ The operating LED
connection to the power supply .
♦ If required, you can switch your connected device on for
further use .
■ 12 │ GB │ IE │ NI
3 .0 charging standard (compatible
TM
TM 2 .0 and Quick Charge
.
® Quick Charge
.
lights up white to indicate there is a
supports the Qualcomm
TM 3 .0 charging standard
®
TM 1 .0) .
SLQC 3.0 A1