NEC Express5800 User Manual page 134

7-4 Maintenance
6.
Select [System Diagnostics].
The System Diagnostics starts and will be completed in approximately three minutes.
When the diagnostics is completed, the screen of the display changes as shown below:
Diagnosis tool title
Diagnosis tool title: Shows the name and version of the diagnostic tool.
Test windows title: Shows the progress of the diagnostics. "Test End" is displayed when
Test Result:
Guide line:
Test window:
When an error is detected by the System Diagnostics, the relevant test result in the test
Summary window is highlighted in red, and "Abnormal End" is displayed in the result on
the right side.
Move the cursor to the test that detected the error, and press the Enter key. Record the
error message that has been output to the Detail Information screen and contact your
service representative.
the diagnostics completes.
Shows the start, end, and elapsed time and completion status of the
diagnostics.
Shows the details of the keys to operate window.
Shows the results of each test that executed the diagnostics. Move
the cursor and press the Enter key on the cursor line to display the
details of the test.
Test windows title
Test result
Test window
Guide line