NEC Express5800 User Manual page 135

7.
Follow the guide line shown at the bottom of the screen, and press the Esc key. The
[Enduser Menu] below is displayed.
<Test Result>
<Device List> Shows a list of connected devices.
<Log Info>
<Option>
<Reboot>
8.
Select <Reboot> in the [Enduser Menu] above.
The CPU blade restarts and the system is started from the NEC EXPRESSBUILDER.
9.
Exit the NEC EXPRESSBUILDER, and remove the CD-ROM from the DVD-ROM
drive.
10.
Power off the CPU blade.
11.
Reconnect all the LAN cables that have been disconnected in Step 2 to the CPU blade.
This completes the System Diagnostics.
Shows the diagnostics completion screen of the above diagnostics.
Shows the log information of the diagnostics. It can be saved on a floppy
disk. To save it on a floppy disk, insert a formatted floppy disk to the
floppy disk drive, and select <Save(F)>.
Optional features can be used from this menu.
Reboots the CPU blade.
Maintenance 7-5