Graphics Accelerator; Fibre Channel Controller Driver - NEC Express5800 User Manual

Graphics Accelerator

Standard graphics accelerator drivers that are mounted will be installed automatically. The
following is the procedure when it is necessary to install manually.
1.
Insert the NEC EXPRESSBUILDER CD-ROM into the DVD-ROM drive.
2.
Click Start menu, point to [Programs], [Accessories] and click [Windows Explorer].
3.
Run "SETUP.EXE" in the following directory.
<DVD-ROM drive Letter>:\WINNT\DOTNET\VIDEO\MATROX\SETUP.EXE.
Windows Server 2003 x64 Editions:
<DVD-ROM drive Letter>:\WINNT\W2K3AMD\VIDEO\MATROX\SETUP.EXE.
4.
Follow the message to continue the installation.
If the dialog message "Digital Signature could not been found." appears, select [Yes] to
continue.
5.
Remove the NEC EXPRESSBUILDER CD-ROM from the DVD-ROM drive, follow the
direction on the screen and restart the system.

Fibre Channel Controller Driver

If you utilize Fibre Channel Controller (N8403-018), update your system with NEC
EXPRESSBUILDER CD-ROM attached to your system.
The Fibre Channel Controller driver will be installed automatically.
NOTE:
Editions and Windows Server 2003 .
This procedure are common to Windows Server 2003 x64
Installing the Operating System B-17