Table of Contents
Advertisement
Changing the Settings
Changed settings are stored in memory even after
the power is turned off .
Before setting
Adjusting the
1
level of spin
noise
Turn the
power on.
2
Select "Wash".
(P.8)
3
Select "Tub Clean".
4
Disabling
ECONAVI
Press and hold at
least 3 seconds.
operation
A double beep sounds,
and "
" is displayed
in the display window.
5
Select the item to
Changing the
set.
rinse cycle
Adjusts the
for "Cotton"
"Level of spin
noise".
program
Disables
ECONAVI
to 1
operation.
Changes the
rinse cycle
of "Cotton"
Preventing
program.
Prevents
clothes from
clothes from
sticking to
sticking
the drum.
Numbers such
to the drum after the
as ":03" may be
washing operation has
diff erent depending
fi nished
on the setting
condition.
34
Change the settings
for easier use.
6
5
Select
in step
.
Adjust the level of spin
noise with
.
Reduces vibration and
noise during spin.
(The spin time may
become longer.)
(Factory default)
Facilitates the startup of spin.
(Large vibration and sound)
6
Select
in step
5
.
Select the setting with
.
Disables ECONAVI operation.
Enables ECONAVI operation.
(Factory default)
6
Select
in step
5
.
Set the rinse cycle with
.
1 time
2 times (Factory default)
6
Select
in step
5
.
Make the setting with
to prevent
sticking.
Disables sticking prevention.
(Factory default)
Enables sticking prevention.
Adjustment
condition for
vibration and
noise varies
according to the
7
type and amount
Press
of clothes, and
also how the
clothes are
.
distributed.
Long beep
(× 6)
The setting is
complete.
(The power turns
off .)
To restore
If the cycle is set
the setting to
to 1, "Auto Tub
Clean" does not
the original
condition,
operate.
use the same
procedure.
This setting
requires approx.
5 more minutes
of operation
time.
With the power turned off , while
Cancelling the
pressing and holding
end buzzer
press and hold
Factory default: Buzzer
ON
least 3 seconds.
(When a double beep sounds, the
setting is complete.)
To restore the setting to the
original condition, use the same
procedure.
(When a double beep (x 2)
sounds, the setting is complete.)
With the power turned off , while
Disables the
Anti-crease
pressing and holding
operation (P.10).
press and hold
Factory default: ON
at least 3 seconds.
(When a double beep sounds, the
setting is complete.)
To restore the setting to the
original condition, use the same
procedure.
(When a double beep (x 2)
sounds, the setting is complete.)
,
at
,
35
Hide quick links:
Advertisement
Table of Contents
