Installation - Panasonic NA-D106X1 WS3 Operating & Installation Instructions Manual

Installation

 To achieve optimum performance of the appliance, read these installation
To servicing personnel
instructions carefully and install the appliance properly and safely.
 After installation, be sure to confi rm normal operation based on Section 6
"Checking after installation".
 The removed fi xing bolts for transfer and the included spanner are necessary
when transferring, etc. Give them to the customer.
 Give these installation instructions to the customer after installation has
fi nished.
 If the installation is not carried out following these installation instructions,
Panasonic will not be liable for any accident or damage that may occur.
 Please keep these installation instructions with "Operating Instructions" in a
To customer
safe place in case of reinstallation due to drain cleaning or relocation even
after the installation has fi nished.
 Be sure to have 2 people carry the appliance.
Hold the proper part.
 Product dimensions (unit: mm)
1217
149 600
584
599
48
 Do not push the centre
of the door with force
(with knee, etc.) when
tilting the appliance for
installation.
(The door will deform.)
Weight 74 kg
* Be careful of the distance from the opened
door to the wall.
45
579
68
558
665
1. Removing the fi xing bolts for transfer and attach the cover
1
Remove the fi xing
bolts for transfer using
the included spanner.
Remove the 2 fi xing bolts for transfer that have
fi xed inside the appliance. If the appliance is used
without removing the bolts, vibration may increase
or the appliance may move, causing danger.
Fixing bolts for
transfer
(Main unit rear side)
2. Attaching the bottom cover
1
Insert the bottom cover along the
guides.
2
Fix with the screw.
Remove the bottom cover screw fi xed on the appliance, and use it.
To prevent
abnormal vibration!
2
Attach the included
cover with the screw.
Insert the claw of the
Cover
cover to the hole and
fi x with the screw.
Screw
(2 locations)
Claw
CAUTION
Be sure to attach the cover.
( To avoid injury caused by the edge)
 When transporting the main unit, attach the bolts in the reverse
procedure.
Remaining water may spill from the inside the main unit. Carry
the appliance with the drain hose propped up against the main
unit.
The removed fi xing bolts for
Attention 
transfer and the included spanner
are necessary when transferring,
etc. Give them to the customer.
Screw
49