Table of Contents
Advertisement
Before removing the system board, follow these steps:
1.
Prepare the computer for disassembly (see
2.
Remove the display assembly (see
3.
Disconnect the battery cable from the system board (see
Remove the system board:
1.
Disconnect the following cables from the system board:
(1) Pogo cable
(2) Speaker cables (2)
(3) Camera cable
(4) Motor cable
(5) Power button cable
(6) Pogo cable
(7) BIOS board cable
(8) Sensor board cable
(9) Antenna cables
2.
Remove the card reader insert (1).
3.
Remove the six Phillips M2.0 × 2.0 screws (2) from the system board.
4.
Remove the two Phillips M1.6 × 1.6 screws (3) from the system board.
40
Chapter 5 Removal and replacement procedures for authorized service provider parts
Preparation for disassembly on page
Display assembly on page
Battery on page
29).
30).
44).
Advertisement
Table of Contents
