Table of Contents
Advertisement
WARNING!
To avoid personal injury and damage to the product:
Do not puncture, twist, or crack the battery.
●
Do not cause an external puncture or rupture to the battery. They can cause a short inside the battery,
●
which can result in battery thermal runaway.
Do not handle or touch the battery enclosure with sharp objects such as tweezers or pliers, which might
●
puncture the battery.
Do not compress or squeeze the battery case with tools or heavy objects stacked on top of the case.
●
These actions can apply undue force on the battery.
Do not touch the connectors with any metallic surface or object, such as metal tools, screws, or coins,
●
which can cause shorting across the connectors.
Before removing the battery, follow these steps:
1.
Prepare the computer for disassembly (see
2.
Remove the display assembly (see
3.
Remove the system board (see
WARNING!
To reduce potential safety issues, use only the user-replaceable battery provided with the
computer, a replacement battery provided by HP, or a compatible battery purchased from HP.
IMPORTANT:
Removing a battery that is the sole power source for the computer can cause loss of
information. To prevent loss of information, save your work or shut down the computer through Windows
before you remove the battery.
Remove the battery:
1.
Remove the black foam tape from the battery connector on the system board (1).
2.
Disconnect the battery cable from the system board (2).
3.
Remove the antenna that is glued to the top of the battery (3).
4.
Peel the gray foam strip off the battery (4).
5.
Peel the antenna off the top of the battery (5).
6.
The battery is secured to the computer with tape that is installed under the battery. To remove the
battery, use tweezers to grasp the end of the tape (1). While turning the tweezers, wrap the tape around
Preparation for disassembly on page
Display assembly on page
System board on page
39).
29).
30).
Component replacement procedures
45
Advertisement
Table of Contents
