To install the solid-state drive, reverse the removal procedures. Run the camera function test after the repair.
For more information, see
When installing a new solid-state drive, be sure to install a thermal pad onto the drive.
Camera
To remove the camera, use this procedure and illustration.
Table 5-12
Camera descriptions and part numbers
Description
Camera
Camera motor
Camera bracket
Before removing the camera, follow these steps:
1.
Prepare the computer for disassembly (see
2.
Remove the display assembly (see
Basic camera function test on page
Preparation for disassembly on page
Display assembly on page
30.
29).
30).
Component replacement procedures
Spare part number
M93508-001
M93507-001
M98023-001
43