Epson C11CA31121 User Manual page 103

3 Set [Output Device], [Input Stacker], [Output Stacker], [Write Speed], [Write Verification],
[Label Type], [Print Mode Setting], and [Copies] as necessary.
 Depending on the discs used, the writing speed may become slower than the set
speed.
 Depending on the discs used, writing may not be able to be performed properly at the
speed recommended for the disc. If this happens, write at a slower speed. In particular,
we recommend writing to DVD±R DL at a slow speed.
 If you print on the matte label type of Epson specified CDs, set [Label Type] to [CD/DVD
Label].
 If you print on the matte label type of Epson specified DVDs, set [Label Type] to [CD/
DVD Premium Label].
 If [Label Type] is set to "EPSON Specified CD/DVD Label," [Print Mode Setting] is set to
[1].
If [Compare] is set for [Write Verification], you can confirm whether data was written to
Notes
discs properly.
4
Click [Publish].
Publishing Discs
103