Epson C11CA31121 User Manual page 104

5 Click [Yes] if you want to save the job data to enable you to use the published job to create
the same disc again.
In this example, we click [No] because the job data cannot be saved.
 If Auto Data (Publish Date or Publish Time) is automatically inserted as label print data,
the saving of Job data may not be possible.
Notes
 See "Creating same discs as published discs" on page 118 in this guide for the
procedure to create the same disc.
EPSON Total Disc Monitor starts, and the disc publishing process begins.
In Batch Mode, if Stacker 2 is taken out during the publishing process, when Stacker 2 is
loaded again, it is always recognized as an input stacker even if it has been switched to
an output stacker. Be sure to take out the published discs from Stacker 2.
 If there are jobs waiting to be processed, the disc publishing process begins in the order
with which jobs were published.
Notes
 See "Taking out discs" on page 105 in this guide for the procedure to take out
published discs.
104