Do not load discs above the red line on the stacker. The product may malfunction, or
the discs may be damaged.
Make sure that the bottom of the stacker is not dirty before loading the discs.
For Batch Mode and when Stacker 3 is set as the output stacker for External Output
Mode, make sure that no discs are loaded in Stacker 3 and Stacker 4. Also, set the lock
lever to the [LOCK] position, and do not pull out Stacker 4.
Stacker 3 is not used in Standard Mode and when Stacker 4 is set as the output stacker
for External Output Mode. Remove Stacker 3.
3
Insert the stacker, and close the disc cover.
Publishing Discs
85