Disc Writing Problems - Epson C11CA31121 User Manual

Disc writing problems

Symptom/
Problem Status
A writing error has
occurred.
Unable to write to disc/
Unable to read disc
In disc publishing in EPSON Total Disc Maker, [Compare] can be set under [Write
Notes
Verification]. See the Help file for EPSON Total Disc Maker for details.
154
Check/Remedy Procedure
Is the disc scratched or dirty?
Scratched or dirty discs cannot be used. Replace with another disc.
The quality of the data recording surface may vary depending on the disc.
Replace with another disc and try again.
Is there dust adhering to the filter of the product rear fan?
Clean the filter.
See "Cleaning the air vents" on page 142 in this guide for the fan filter
cleaning procedure.
Is the disc being handled correctly?
 Handle the disc correctly by following the disc user's guide.
 Do not affix adhesive stickers to the disc. This may make recording and
playback of data no longer possible.
 Do not use this product in locations with large amounts of dust or smoke.
This can cause drive writing errors.
See "Handling discs" on page 76 in this guide for details on disc handling.
Was the cover opened or the product jolted during publishing?
Do not subject the product to jolts or impacts during disc publishing. The
drive may malfunction, or the disc may become unusable.
Also, do not open the cover during publishing. This could adversely affect the
printing and writing quality of the disc. Before opening the cover, pause the
job in EPSON Total Disc Maker. See "Pausing jobs" on page 109 in this guide
for the procedure for pausing jobs.
Is your computer compatible with the operating environment of this product?
Use and connect this product to a computer compatible with the operating
environment.
See "Before installation" on page 24 in this guide for details.
Is the printer tray dirty?
Clean the printer tray.
See "Ink Is Smeared on the Disc Recording Surface" in the PP-100N
Administrator's Guide for the printer tray cleaning procedure.