Epson C11CA31121 User Manual page 148

Error Message
Disc feed error
DRV1/2
Disc feed error
PRN
Disc is
not writable
Disc is
wrong type
Disc pickup
error (DRV1/2)
Disc pickup
error (PRN)
Disc pickup
error (ST1/2)
148
Remedy
The disc was not transferred properly to the drive.
Perform the procedure below.
1. Remove the discs from the drive tray.
2. Fully separate and reload the discs in the input stacker.
3. Close the disc cover.
The disc was not transferred properly to the printer.
Perform the procedure below.
1. Remove the discs from the printer tray.
2. Fully separate and reload the discs in the input stacker.
3. Close the disc cover.
Processing of the job is paused. Perform the procedure
below.
1. Open the disc cover.
2. Remove the disc that cannot be written or the disc that is
already written from the input stacker (Stacker 1 or Stacker
2).
3. Load a disc that can be written. (See "Writable disc types"
on page 75 in this guide.)
4. Close the disc cover.
Processing of the job is automatically resumed.
Processing of the job is paused. Perform the procedure
below.
1. Open the disc cover.
2. Remove the disc from the input stacker (Stacker 1 or
Stacker 2) that is a different type from the disc type that was
set.
3. Load the correct disc type. (See "Loading discs" on page
84 in this guide for the disc type setting.)
4. Close the disc cover. Processing of the job is automatically
restarted.
The arm cannot pick up the disc in the drive tray.
Turn off the power, and then turn it on again. If the same error
message still appears, repair is required. Please contact
Customer Support.
The disc in the printer tray cannot be picked up.
Turn off the power, and then turn it on again. If the same error
message still appears, repair is required. Please contact
Customer Support.
The arm cannot pick up the disc in the stacker.
If the indicated stacker is an input stacker, fully separate and
reload the discs in the stacker.
Notification
Sound