Table of Contents
Advertisement
3
Enter the settings for [Name of Custom Label Size], [Inside diameter], and [Outside
diameter], and click [Save].
Setting item
Enter the name of the user defined label size (number of characters: up to 24
characters).
Name of Custom
Label Size
If characters that are 4 bytes are used, the number of characters you can use
becomes less than the above.
Set the inside diameter of the label. You can set a value within the range of 180
Inside Diameter
to 500 (18.0 to 50.0 mm).
Set the outside diameter of the label. You can set a value within the range of 700
Outside Diameter
to 1,194 (70.0 to 119.4 mm).
Select this to mask the rib area.
Rib refers to the protruding section of the disc inside circumference.
Mask Rib Area
Masking the rib area enables you to prevent ink running onto the rib when a
printed disc and rib touch in the output stacker.
Set the inside diameter of the rib area. You can set a value within the range of
Rib Inside Diameter
270 to 500 (27.0 to 50.0 mm).
Set the width of the rib area. You can set a value within the range of 1 to 115 (0.1
Rib Width
to 11.5 mm).
Printing inside the rib area may result in ink getting on discs, discs sticking together, or
discoloration.
Setting the range outside of the recommended print area (inside diameter of 45.0 mm or
more and outside diameter within 116.0 mm) and printing may result in the discs or tray
becoming dirty, peeling off or blurring of the print, or discs sticking together. Check the
Notes
label print range of the discs you are using before configuring the setting. See "Printable
area" on page 78 in this guide for details on the recommended print area.
Description
Publishing Discs
81
Advertisement
Table of Contents
