Fx 3Uc Plc - Mitsubishi Electric Melsec-F FX3GC Series User Manual

FX /FX /FX /FX /FX
3S 3G 3GC 3U 3UC
Common Items
2.5 FX PLC
3UC
FX PLC
3UC
C
*1. The relay output type PLCs do not have pulse output.
*2. The product connects with the servo amplifier via the terminal block, MIL connector (20 pins), or the
SSCNET dedicated connector.
*3. FX -20SSC-H only connects with the servo amplifier applicable to SSCNET III.
3U
*4. Up to 7 special function units/blocks can be connected to the FX
Note:
• Use the FX
3UC
the FX PLC does not have enough capacity.
3UC
• For details on the connectable special function units/blocks and system configuration, refer to the following
manual.
PLC User's Manual - Positioning Control Edition
B and C show the unit positions.
B
(For installation details, refer to the manuals of special function units/blocks.)
Transistor output (Y000 to Y002)
C
B
FX -1PS-5V
3UC
C
Special function
Special function
FX -CNV-IF
2NC
-1PS-5V (extension power supply unit) only if the 5V DC power supply unit incorporated in
MIL connector (20-pin)
*1
POWER
ERROR
START
DOG PGO
FX -10PG X0 FP
X1
2N RP
f A CLR
f B
- Terminal board (M3)
- MIL connector (20-pin)
- SSCNET III dedicated
connector *2
block
unit
For details, refer to the FX
3UC
For details, Refer to the FX
Refer to the FX
2 Unit Connection
2.5 FX3UC PLC
*3
Servo motor or
Stepping motor
*2
*2
-20SSC-H USER'S MANUAL.
3U
-32MT-LT(-2) PLC.
Hardware Edition.
3UC
Hardware Edition.
3UC
A - 11
A
B
Apx.