Mitsubishi Electric Lossnay LGH-RX5-E Series Manual page 15

System Examples: 2 (Lossnay M-NET Remote Controller PZ-52SF-E)
The following groups can be configured.
● Further information please refer LGH-RX
Centralized controller ( 000 )
Power
supply
unit
Outdoor unit
(059)
Group 1 : One Lossnay unit and one Lossnay M-NET remote controller.
Group 2 : Without a Lossnay M-NET remote controller.
Group 3 : Multiple Lossnay units and one Lossnay M-NET remote controller.
Group 4 : One Lossnay unit and two Lossnay M-NET remote controllers.
Group 5 : Multiple Lossnay units and two Lossnay M-NET remote controllers.
Group 6 : One Lossnay unit is interlocked to one indoor unit.(PZ-60DR-E is not
necesally)
Group 7 : One Lossnay unit is interlocked to multiple indoor units.(PZ-60DR-E is
not neccesally)
Group 8 : Multiple Lossnay units connected to indoor unit transmission cable
side and one Lossnay M-NET remote controller.
Group 9 : Without Lossnay units.
Caution:
● If change the Group setting in the future, no need to change the M-NET wiring, Just change the address setting from central-
ized controller.
● In this application, Lossnay remote controller PZ-41SLB-E cannot be used.
Technical Manual.
4
Lossnay Lossnay
(001) (002)
(101)
Lossnay M-NET remote
controller PZ-52SF-E
Group1 Group2
Lossnay
Indoor
unit (010)
(009)
MA Remote
controller
Group6
Lossnay Lossnay Lossnay
(003) (004) (005)
(103)
Lossnay M-NET remote
controller PZ-52SF-E
Group3
Indoor
Indoor
unit
unit
(012)
(011)
MA Remote
controller
Group7
Lossnay
(006)
(106) (156)
Lossnay M-NET remote
controller PZ-52SF-E
Group4
Lossnay Lossnay Lossnay
(013) (014) (015)
Lossnay M-NET remote
controller PZ-52SF-E (114)
Group8
・・・Group setting
Interlocked
・・・
operation setting
( ) address
Lossnay Lossnay
(007) (008)
(107) (157)
Lossnay M-NET remote
controller PZ-52SF-E
Group5
Indoor
unit
(016)
MA Remote
controller
Group9
C-15