Mitsubishi Electric Lossnay LGH-RX5-E Series Manual page 3

1. Summary
Technical manual detailing the control and operation of commercial-type Lossnay units ( LGH-RX
Possible System Configurations
(1) When using only the Lossnay remote controller.
( 2 ) Linking Lossnay and City Multi units.
( 3 ) Linking Mr. Slim.
( 4 ) Lossnay central control systems.
( 5 ) Linking with external equipment ( BMS ) .
2. Applicable Models
● Lossnay ( LGH-RX type )
These models have temperature sensors at return stale indoor air (RA) and outside air intake (OA) sides and can automati-
cally switch to ventilation (Lossnay/By-pass) mode.
LGH-15RX -E
5
LGH-80RX -E
5
● Lossnay Remote Controller ( PZ-60DR-E )
It is possible to control all of the function of LGH-RX
Use when operating from 1 to 15 Lossnay units together at the same time.
PZ-60DR-E is not M-NET control, however, LGH-RX
C-78).
● Lossnay Remote Controller ( PZ-41SLB-E )
Use when operating from 1 to 15 Lossnay units together at the same time. When using M-NET transmission to operate from
a centralized remote controller, use the PZ-60DR-E OR PZ-52SF-E.
It can start and stop the unit, change fan speed, and switch the ventilation mode. It also includes indicators that show errors
and when filter maintenance is required Function is limited in case of LGH-RX
● Lossnay M-NET Remote Controller ( PZ-52SF-E )
Use with Mitsubishi Electric Air conditioner Network system ( MELANS ) (Refer to page C-92). Because the remote controller
is power-supplied using the M-NET transmission line, it cannot be linked with Mr. Slim and other such systems that do not
use M-NET. It can start and stop the unit, change fan speed, and switch the ventilation mode. It also includes indicators that
show errors and when filter maintenance is required Function is limited in case of LGH-RX
Please refer to the technical documentation for City Multi, Mr. Slim systems and the cen-
tral controller ( MELANS ) .
LGH-25RX -E
5
LGH-100RX -E
5
5
LGH-35RX -E
5
LGH-150RX -E
5
-E, such as, Extra-Low-fan speed, weekly timer.
-E can be use with PZ-60DR-E in the M-NET system. (Refer to page
5
5
-E Series ) .
5
LGH-50RX -E
5
LGH-200RX -E
5
-E (Refer to page C-91).
-E (Refer to page C-92).
5
LGH-65RX -E
5
C-3