Table of Contents
Advertisement
5 5 .3.4
Configuration/integration
An Ethernet interface is available for integrating the device into system
environments/networks. RF615R can be configured via the Ethernet interface and with direct
connection to the PC. You can configure and program the reader using the following tools:
Note that configuration in parallel is not possible using different tools. Simple process
controls (e.g. a traffic signal) can be implemented directly using the reader via the digital
input/output.
Figure 5-13
SIMATIC RF600
System Manual, 06/2019, J31069-D0171-U001-A22-7618
STEP 7 Basic/Professional (TIA Portal)
or via EtherNet/IP
Web Based Management (WBM)
OPC UA or XML based user applications
Overview: Configuration of RF615R readers
Readers
5.3 SIMATIC RF615R
137
Advertisement
Table of Contents
