Antenna Patterns; Alignment Of Transponders To The Antenna - Siemens SIMATIC RF610T ATEX System Manual

Hide thumbs Also See for SIMATIC RF610T ATEX:
Table of Contents

Advertisement

L L imitations in Japan
Note
L L imitation of the radiated power (ARIB)
RF600 systems that are put into operation in Japan must not exceed the following radiated
power with an RF620A antenna:
The maximum permissible radiated power of the antenna cannot be reached or exceeded
due to the negative antenna gain.
6.3.6

Antenna patterns

6.3.6.1

Alignment of transponders to the antenna

Polarization axis
Since the RF620A antenna has linear polarization, it is necessary to consider the alignment
of the transponders with regard to the polarization axis of the antenna.
The polarization axes of antenna and transponder must always be parallel. The symbol on
the antenna indicates the polarization axis.
Figure 6-13
SIMATIC RF600
System Manual, 06/2019, J31069-D0171-U001-A22-7618
500 mW EIRP (or 27 dBm EIRP) for operation with RF650R (ARIB STD-T107)
4000 mW EIRP (or 36 dBm EIRP) for operation with RF680R/RF685R (ARIB STD-T106)
Polarization axis
Antennas
6.3 SIMATIC RF620A
257

Advertisement

Table of Contents
loading

This manual is also suitable for:

6gt2810-2bb80-0ax1

Table of Contents