Table of Contents
Advertisement
1 1 0.3
Reader and antenna holders
10.3.1
Overview
The following read points (readers and antennas) have a standardized VESA 100 mounting
system (4 x M4) and can be secured with a SIMATIC antenna holder:
10.3.2
Ordering data
Table 10- 13 Ordering data for SIMATIC antenna holder
Description
SIMATIC antenna holder for RF600 devices
10.3.3
Mounting with the SIMATIC antenna holder
Flexible mounting is possible with the SIMATIC antenna holder. The RF600
readers/antennas can be rotated in any direction with this holder.
Follow the steps below to mount the SIMATIC antenna holder with the reader or the antenna
on the wall:
1. Install the wall mounting plate (A) on the wall.
2. Install the articulated joint (B) with the screws
3. Fasten the reader or the antenna using the four bore holes on the antenna mounting plate
4. Mount the antenna mounting plate (C) into the articulated joint (B) and fasten it with the
5. Align the SIMATIC antenna holder by sliding the setting angle on the articulated joint (B)
SIMATIC RF600
System Manual, 06/2019, J31069-D0171-U001-A22-7618
SIMATIC RF610R, RF615R, RF650R, RF680R, RF685R
SIMATIC RF640A, RF642A, RF650A, RF660A, RF680A
(C).
help of screws
to the articulated joint (B).
and tighten all the screws.
10.3 Reader and antenna holders
Article numb b er
6GT2890-2AB10
on the wall mounting plate (A).
Accessories
497
Advertisement
Table of Contents
