Table of Contents
Advertisement
Readers
5.6 SIMATIC RF685R
S S tandards, specifications, approvals
Proof of suitability
MTBF
1)
2)
Note that, depending on the power consumption, using extension cables > 20 m (6GT2891-4FN50)
3)
4)
5 5 .6.6
Dimension drawing
Figure 5-49
All dimensions in mm (± 0.5 mm tolerance)
224
Measured at the output of the antenna socket.
All supply and signal voltages must be safety extra low voltage (SELV/PELV according to
EN 60950). The voltage sources must meet the requirements of limited power sources (LPS) and
NEC Class 2.
may lead to a voltage drop on the reader. This voltage drop can mean that the necessary mini-
mum voltage on the reader is below the required 20 V.
Keep to the switching schemes of the DI/DQ interface.
The values for shock and vibration are maximum values and must not be applied continuously.
These values only apply to mounting using screws.
Dimension drawing RF685R
EN 301 489-1 V1.9.2 / EN 301 489-3 V1.6.1 /
EN 302 208-1/-3 V1.4.1
FCC CFR 47, Part 15 section 15.247
29 years
System Manual, 06/2019, J31069-D0171-U001-A22-7618
6 6 GT2811- - 6 6 CA10- - x x AA0
SIMATIC RF600
Advertisement
Table of Contents
