Table of Contents
Advertisement
5 5 .4.4
Configuration/integration
An Ethernet interface is available for integrating the device into system
environments/networks. The RF650R can be configured via the Ethernet interface and with
direct connection to the PC. You can configure and program the reader using the following
tools:
Note that configuration in parallel is not possible using different tools. Simple process
controls (e.g. a traffic signal) can be implemented directly using the reader via four digital
inputs/outputs.
Figure 5-22
SIMATIC RF600
System Manual, 06/2019, J31069-D0171-U001-A22-7618
using Web Based Management (WBM)
OPC UA or XML based user applications
Overview: Configuration of RF650R readers
Readers
5.4 SIMATIC RF650R
161
Advertisement
Table of Contents
