Before Running Diagtools; More Information About The Pc's Setup Program - HP Brio 7100 User Manual

NOTE FOR
NET VECTRA PCS

Before Running DiagTools

Before you run the Hardware Diagnostics, ensure that the following are
correctly configured in the computer's BIOS Setup program:
No operating system is specified, which means that:
if the menu has an item
•
Main
, set it to
Play OS
if the menu has an item to select the operating system, set
•
Main
it to .
Other
All
Hardware Protection
or
Enabled Unlocked
The option to start from the floppy disk is enabled.

More Information About The PC's Setup Program

Setup is an integrated (ROM-based) program that displays the PC's
configuration and allows you to change the configuration parameters.
Setup changes system behavior by modifying the power-on
initialization parameters. Setting incorrect values may cause the PC to
fail at start-up. If this occurs, press F9 in the Setup program. This will
load the Setup default values and allow the PC to recover.
To enter the PC's Setup program, restart the PC and press F2 when the
Vectra Logo or Kayak logo screen (or the Summary screen) appears.
To run DiagTools from the hard disk drive, the PC must have
the correct boot (start) configuration. All Net Vectra PCs are
provided with a ready-to-use Hardware Diagnostics dual boot
configuration. For more information, refer to "Starting
DiagTools from the Hard Disk Drive", on page 9.
Running Windows 95
No
items in the
.
1 Starting DiagTools
Before Running DiagTools
or
Plug and
menu are set to
Security
English 7