HP Brio 7100 User Manual page 71

Code
0342h Address mark not found in random test.
0344h Requested sector not found in random
test.
0345h Reset failed in random test.
0347h Drive parameter activity failed in random
test.
0348h DMA overrun error in random test.
0349h Attempt to DMA in 64 KB boundary in
random test.
0350h CRC or ECC data error in random test.
0360h Seek operation failed in random test.
0380h Drive not ready.
Explanation
0301h – 03FFh: Floppy Disk Error Codes
Details/Parts to Check
Floppy disk drive error.
Check your floppy disk drive is installed correctly.
If error persists, install new floppy disk drive.
Floppy disk drive error.
Check your floppy disk drive is installed correctly.
If error persists, install new floppy disk drive.
Floppy disk controller error.
Check your floppy disk drive is installed correctly.
If error persists, install new system board.
Floppy disk drive or floppy disk controller error.
Check your floppy disk drive is installed correctly.
Install new floppy disk drive.
If error persists, install new system board.
Diagnostic test error.
Re-run the diagnostic tests.
Diagnostic test error.
Re-run the diagnostic tests.
Diagnostic test error.
Re-run the diagnostic tests.
Floppy disk drive or floppy disk controller error.
Check your floppy disk drive is installed correctly.
Install new floppy disk drive.
If error persists, install new system board.
Floppy disk drive error.
Check your floppy disk drive is installed correctly.
If error persists, install new floppy disk drive.
Appendix A The Error Codes
English 59