0E00H - 0E5Fh: Smbus (System Management Bus) Error Codes - HP Brio 7100 User Manual

Code
0C07h Signature failed.
Code
0E00h Register test failed.
0E10h Status test failed.
0E20h <test name> <read/write type>
test failed.
0E30h LM75 register test failed.
0E31h LM75 temperature test failed.
0E32h LM75 test failed.
0E40h LM80 register test failed.
0E41h LM80 (voltage|temperature|fan speed)
measurement test error.
0E42h LM80 test failed.
0E50h 16LC63 register test failed.
0E51h 16LC63 (temperature|3.3 Volt|5
Volt|12 Volt|CPU Core Volt|CPU I/O
Volt) measurement failed.
Appendix A The Error Codes
0E00h – 0E5Fh: SMBus (System Management Bus) Error Codes
Explanation
0E00h – 0E5Fh: SMBus (System Management Bus)
Error Codes
Explanation
74 English
Details/Parts to Check
This message is displayed when the signature is not
found. The write test writes a signature on the tape.
First run the write test, and then the read test.
Details/Parts to Check
Function not supported or system board error.
Function not supported or system board error.
Function not supported or system board error.
Function not supported or system board error.
Function not supported or system board error.
Function not supported or system board error.
Function not supported or system board error.
Function not supported or system board error.
Function not supported or system board error.
Function not supported or system board error.
Function not supported or system board error.