HP Brio 7100 User Manual page 78

Appendix A The Error Codes
0601h – 0617h: Serial Port Error Codes
Code
0609h FIFO trigger level test failed at port
XXXXh.
0610h FIFO character timeout indication test
failed at port XXXXh.
0611h FIFO data transfer test failed at port
XXXXh.
0612h Baud rate speed test failed.
0613h Infrared register test failed at port
XXXXh.
0614h Infrared interrupt ID test failed at port
XXXXh.
0615h Infrared internal loopback test failed at
port XXXXh.
0616h Infrared line status test failed at port
XXXXh.
0617h Infrared data transfer test failed at port
XXXXh.
66
Explanation
English
Details/Parts to Check
Serial port controller error.
Install new system board.
Serial port controller error.
Install new system board.
Serial port controller error.
Install new system board.
If the test is running on a 16650 UART, check the
frequency selected in the test menu matches the
jumper settings on the card.
Re-run the diagnostics test.
Serial port controller error.
Install new system board.
Serial port controller error.
Install new system board.
Serial port controller error.
Install new system board.
Serial port controller error.
Install new system board.
Serial port controller error.
Install new system board.