HP Brio 7100 User Manual page 67

Code
0210h CRC or ECC data error in sequential test.
0211h ECC (Error Correction Coding) corrected
data error.
0220h Controller failure.
0240h Seek operation failed.
0252h Address mark not found in random test.
0254h Requested sector not found in random
test.
025Ah Bad sector flag detected in random test.
0260h CRC or ECC data error in random test.
0265h Drive not ready in random test.
0275h Data mismatch in random test.
0280h Drive not ready in sequential test.
Explanation
0201h – 02FFh: Hard Disk Error Codes
Details/Parts to Check
Diagnostic test error.
Re-run the diagnostic tests.
Diagnostic test error.
Re-run the diagnostic tests.
Hard disk controller error.
Check your hard disk drive is installed correctly.
If error persists, install new system board.
Hard disk controller error.
Check your hard disk drive is installed correctly.
If error persists, install new system board.
Re-enter the test parameters and re-run the test.
If error persists, install new hard disk drive.
Re-enter the test parameters and re-run the test.
If error persists, install new hard disk drive.
Diagnostic test error.
Re-run the diagnostic tests.
Diagnostic test error.
Re-run the diagnostic tests.
Hard disk error.
Check your hard disk drive is installed correctly.
If error persists, install new hard disk drive.
Hard disk error.
Check your hard disk drive is installed correctly.
If error persists, install new hard disk drive.
Hard disk error.
Check your hard disk drive is installed correctly.
If error persists, install new hard disk drive.
Appendix A The Error Codes
English 55