Mitsubishi Electric KD Series User Manual page 15

1-3-1 Conditions - CE mark certification – When using optional Power Supply Unit (PSU)
This product is designed to comply with EMC Directive 2014/30/EC of EU legislation, when used with the
optional Power Supply Unit KDCX24VPW.
In order to make this product CE mark compliant, use this product under the following conditions.
① Length of 24V power supply cable connecting with the PSU has to be 3m or shorter. Attach
ferrite cores recommended in the following pages with the power supply cable in order to
reduce noise emission. The details of the ferrite cores are explained in the following pages.
② Prepare the power supply dedicated for this product, and supply 24V power to the PSU.
Moreover, this product is designed as an embedded module. When this product shall be installed to the
other equipment, the equipment has to be compliant with the necessary regulation and directives.
This product is complied with the following EMC directives and standards.
EMC directives
Applicable standards
Category of ISM equipment by EN55011: Comply with Group 1, Class A test standard
Class A equipment is regulated to be used under industrial environment. It could be
potentially difficult to assure the electromagnetic compatibility under other
environment. Refer to EN55011 standards for further details.
TM-XH719C
1-3 CE marking
2014/30/EC
COPYRIGHT©2017-2020 MITSUBISHI ELECTRIC CORPORATION. ALL RIGHTS RESERVED.
Immunity EN 61000-6-2：2005 + AC：2005
Emission EN 61000-6-4：2007 + A1：2011
15