1-3-2 CE mark compatibility conditions – On usage with optional Power Supply Unit (PSU)
2. KD6R587CX (L2 type), KD6R807CX (L3 type)
Attach ferrite cores as described in below.
- Cable between V1/V3 connector and 5V power supply of PSU: One Ferrite core A (2 turn)
- Cable between V2/V4 connector and 24V power supply of PSU: One Ferrite core B (2 turn)
- Cables between connectors D1-D8, and Frame grabber: One Ferrite core C for each cable (3 turn)
- Cables between PSUs and 24V DC power supply: One ferrite core A (2 turn)
KD6R587CX
KD6R807CX
V1
V2
V3
V4
D1◎
D2
D3
D4
D5●
D6
D7
D8
TM-XH719C
1-3 CE marking
A
Optional
A
PSU
B
A
Optional
A
PSU
B
Port 1
C
Port 2
C
Port 3
C
Port 4
C
Frame Grabber board x 2
C
Port 1
C
Port 2
Port 3
C
Port 4
C
COPYRIGHT©2017-2020 MITSUBISHI ELECTRIC CORPORATION. ALL RIGHTS RESERVED.
DC24V power
DC24V power
17