UPS5000-H-(400 kVA-800 kVA)
User Manual (100 kVA Power Module)
Figure 6-9 Preparing a cable terminal outside the cabinet
Step 4 Connect the cable with a crimped terminal to the corresponding copper bar.
Step 5 Clear sundries inside the cabinet.
----End
6.3 Single UPS Installation (400–600 kVA)
When you install the UPS and connect cables, do not step on the front door baffle
plate and the door support at the bottom of the cabinet to prevent paint flake-off
and deformation. Otherwise, the front door will not be properly closed.
6.3.1 Installing the UPS
6.3.1.1 Installing the Cabinet
Installation on the Floor
Ensure that the installation floor is level.
Step 1 Install the cabinet.
1.
Issue 02 (2021-04-22)
NO TE
Choose an appropriate cabling route based on the actual situation. The figure is for
reference only.
CA UTION
NO TICE
Determine the mounting holes for the cabinet based on the marking-off
template. A indicates the mounting holes for channel steel. B indicates the
mounting holes for the floor. The unit is mm.
Copyright © Huawei Technologies Co., Ltd.
6 Installation
69