Setting The Data Cartridge - NEC Express5800 Series User Manual

Setting the Data Cartridge

IMPORTANT:
As the data cartridge to be set in the magazine, use
While setting the data cartridge, do not turn off the server. This may
cause a malfunction or the damage data.
1.
Ensure that the Tape Blade is powered on.
Ensure that the write-protect switch is properly set.
2.
Open the cartridge door on the front of the Tape Blade.
3.
Grasp the cartridge so that the write-protect switch faces you.
Upgrading Your Tape Blade
9-11