NEC Express5800 Series User Manual page 104

9-12
Upgrading Your Tape Blade
4.
Slide the cartridge into the tape load compartment.
Cartridge loader will draw cartridge into the Tape Blade. The green Ready
LED flashes until loading the cartridge. It then glows steadily.
IMPORTANT:
during the drive is installed into the drive. It may cause the error if the
position is changed with installation.
NOTE:
position, once the cartridge is removed from the drive, then, once again,
re-installation will be done.
Do not change the position for the write protect switch
When the data cartridge is need to be re-installed at the eject