Safety Instructions; Safety At The Workplace - Silvercrest SCNM 100 A1 Operating And Safety Instructions Manual

Symbol
This device is fragile. Handle with care.
This recycling symbol marks, for example, an item or material parts as valuable for recycling.
Observe the labelling of the packaging materials when separating waste. These are marked with abbreviations
(a) and numbers (b) with the following meaning: 1-7 Plastics / 20-22: Paper and cardboard / 80-98: Com-
posite materials. Recycling helps to reduce the consumption of raw materials and to protect the environment.
This symbol reminds you to dispose of the packaging in an environmentally friendly way.
The materials and components of this device can be recycled.
Can be disposed of (completely empty) in the separate collection for packaging.
Risk of suffocation
To avoid the risk of suffocation, keep this plastic bag away from babies and young children. Do not use this bag
in cots, beds, prams or playpens. The bag is not a toy.
Read the user manual before use.

Safety instructions

Read all the safety instructions and information before using the sewing machine.
• Failure to comply with the safety instructions and information may cause electric shock, fire and/or serious injury.
• Keep all safety instructions and information in a suitable place near the appliance for future reference.
• Also hand over the user manual when passing on the device to third parties.
• The term "device" used in the safety instructions refers to the sewing machine (with power cord and foot controller).

Safety at the workplace

• This sewing machine is intended for household use only.
• Be sure to use the sewing machine in the temperature range from 5ºC to 40ºC. If the temperature is excessively low, the
sewing machine can fail to operate normally.
• Do not install the device at an altitude of more than 2000 meters above sea level.
• Do not use the device if it is wet or in humid environment. Always use the device only in dry rooms.
• Place the sewing machine on a stable, flat, dry and stable work surface.
• Keep your work area clean and well lit. Disorder or unlit work areas can lead to accidents.
• Install the power cord so that there is no tripping hazard.
• Keep children and other persons away while using the device. You may lose control of the device if distracted.
Description
Safety instructions
EN 13