Sewing Corners; Sewing Stretch Fabrics; Sewing Thin Fabrics - Silvercrest SCNM 100 A1 Operating And Safety Instructions Manual

v Sewing corners
Stop the sewing machine when you reach a corner.
Lower the needle into the fabric by moving the needle to the low-
est position with the up/down button (3).
Lift the two-step presser foot lever (22).
Use the needle as a pivot and turn the fabric 90°.
Lower the two-step presser foot lever (22) and continue sewing.
v Sewing stretch fabrics
①
Baste the pieces of fabric together, and then sew without
stretching the fabric.
1
v Sewing thin fabrics
When sewing thin fabrics, the stitching may become misaligned
or the fabric may not be fed correctly.
1
Use stabiliser material
with the fabric.
Remove excess stabiliser material when you have finished sew-
ing.
Sewing basics
①
under the fabric and sew it together
EN 37