Table of Contents
Advertisement
Step6. Change the Fan Mode Time
Select "Fan Mode Time" and press "OK".
Press " " or " " to set the fan mode time. Press "OK" to
confirm the setting.
It changes as follows:
"10 min" ↔ "5 min" ↔ "3 min".
Press " " to return to Step4.
NOTES:
•
Indoor rotation control cannot be set for the sub remote controller.
•
If the "Power Savings Mode" changes the "Power Saving Details Setting" in outdoor capacity control, the
"Power Saving ON/OFF" turns OFF.
•
This function can be used only when the operation mode is cooling/heating.
•
The cooling/heating capacity can decrease when using the "Power Saving" function.
(3) Intermittent Control Setting
Item
Level Change
1.
Set Intermittent Control
Step1. Select "Service Menu" on the Service & Installation screen
and press "OK".
Step2. Select "Power Saving Details Setting" and press "OK.
→ Power Saving Details Setting screen is displayed.
Step3. Select "Intermittent Control" and press "OK".
Step4. Change level
Press " " or " " to select the level and press "OK".
It changes as follows:
"Low <-> Med <-> High" ↔ "Low only" ↔ "Med only" ↔
"High only".
Press " " to return to Step3.
NOTES:
•
This function cannot be set when only the total heat exchanger is connected.
•
Each power savings level repeats the operation as follows:
Power Saving : LOW
Power Saving : MED
Power Saving : HIGH
•
If the "Power Savings Mode" changes the "Power Saving Details Setting" in intermittent control, the "Power
Saving ON/OFF" turns OFF.
•
The cooling/heating capacity can decrease when using the "Power Saving" function.
(4) Reset Method
1.
Reset power saving details setting to default values
Step1. Select "Service Menu" on the Service & Installation screen
and press "OK".
Step2. Select "Power Saving Details Setting" and press "OK.
Step3. Select "Reset Default" and press "OK".
Step4. Select "Yes" and press "OK", reset the power saving details
to default and return to Step2.
Select "Cancel" and press "OK", return to Step2.
A16381TMF2
The power saving details settings can change the power savings level.
Cool/Dry Mode
Normal Mode 20 minutes ⇔ Fan Mode 10 minutes
Normal Mode 17 minutes ⇔ Fan Mode 13 minutes
Normal Mode 15 minutes ⇔ Fan Mode 15 minutes
15. Power Saving Details Setting
Rotation Control
10 min
5 min
3 min
Select time in fan mode per 1 unit.
Select
OK
Description
Power Saving Details Setting
Capacity Control
Rotation Control
Intermittent Control
Reset Default
OK
Select
Intermittent Control
Low <-> Med <-> High
Low only
Med only
High only
Select setting range of power savings.
OK
Select
Heat Mode
Normal Mode 25 minutes ⇔ Fan Mode 5 minutes
Normal Mode 20 minutes ⇔ Fan Mode 10 minutes
Normal Mode 15 minutes ⇔ Fan Mode 15 minutes
Power Saving Details Setting
Capacity Control
Reset to default value for Power
Rotation Control
Saving Details setting?
Intermittent Control
Yes
Reset Default
Select
OK
OK
Back
Back
Back
Cancel
Back
33
Advertisement
Table of Contents
