Setting Hardware Definition; Subunit Structuring - Toshiba GRB200 Instruction Manual

Setting Hardware definition

In order that Hardware in MainUnit and SubUnits is described in Replica, the user needs to
set Use for the 'Hardware definition' settings. In SubUnit#1 and SubUnit#2, the descriptions
are summarized with settings: VCT Definition and BI Definition.

SubUnit structuring

2.2.1
It is required for the user to enter Use for the definition settings when an implemented
hardware (i.e., VCT and BIO) is to operate in the SubUnit. Figure 2.1-1 shows the steps for
VCT and IO settings in SubUnit#1. It is also required entering Use for 'SubUnit Structure'
menu for the SubUnit connection. Note that the settings of all hardware have a setting with
default NoUse.
SubUnit#1 structuring
(i)
Setting [SubUnit#1]: Use has to be set when the SubUnit#1 is connected with
MainUnit. If the SubUnit#1 is not connected, set NoUse.
Setting [Sub1 VCT#1]: Use has to be set when VCT#1 is installed in SubUnit#1.
Setting [Sub1 VCT#2]: Use has to be set when VCT#2 is installed in SubUnit#1.
Settings [Sub1 IO#1] to [Sub1 IO#8]: Use has to be set when BIO modules are
installed in SubUnit#1.
Common
10:48 1/4
Misc. >
CH_Exclusion >
Replica >
H/W Definition >
H/W Definition
10:48 1/2
SubUnit Structure >
BI Definition >
Switches for SubUnit#1 hardware
SubUnit#2 structuring
(ii)
Similar to the SubUnit#1, it has to be set Use for the setting [SubUnit#2] and other required
settings when VCTs and IOs has to operate.
SubUnit Structure
10:48
SubUnit#1
Use
SubUnit#2
Use
Figure 2.2-1 Steps of SubUnit#1 structuring
- 14 -
SubUnit#1
10:48
Sub1 VCT#1
Use
Sub1 VCT#2
Use
Sub1 IO#1
Use
Sub1 IO#2
1/2
Use
+>
Sub1 IO#3
Use
+>
Sub1 IO#4
Use
Sub1 IO#5
Use
Sub1 IO#6
Use
Sub1 IO#7
Use
Sub1 IO#8
Use
6F2S1923 (0.03)
SubUnit#2
10:48 1/10
Sub2 VCT#1 +
Use
1/10
+
+
+
+
+
+
+
+
+
+
GRB200C (Replica)