Panasonic DVCPRO50 Service Manual page 147

a-1) Explanation of Main window and menu bar.
1) Program Menu
[Adjust]
Adjustment program can be selected clicking this portion.
[Error Rate]
Error rate check can be selected clicking this portion.
[START]
Adjustment or Error rate checking can be started by clicking this portion.
[IRQ]
Break into the program during execution by clicking this portion. (It is effective, only on limited process.)
[STOP]
The program can be stopped, forcibly by clicking this portion.
[Data Download]
Receiving EVR data to PC from VTR connected (VTR to PC)
[Data Upload]
Transfer the RF adjustment data from PC to VTR for setting up. (PC to VTR)
* Data Upload can not be functioned unless "Data Download", "Load on File menu" or all adjustment
program is executed.
[Data Initialize (include Upload)]
Setting up the RF initial adjustment data into VTR connected.
[Program Reset]
All part of application program can be reset.
[END]
By clicking this portion, application software can be closed.
ELE-6