Panasonic DVCPRO50 Service Manual page 70

< I/F software (Flash ROM) Version UP >
1. Copy the program software (I/F:VSIXXX.mot) into the personal computer.
2. Turn on the VTR power.
3. Excute the VSI2312L. exe so that the following screen appears.
4. Select the each item as below;
Microcomputer select
Software select
Writing data
Target machine ID check
Port
Baud Rate
STOP Bits
Byte Size
Parity
5. Press "OK" button so that the following screen appears and Check sum is calculated. (refer to figure 2)
Figure 1
M32170F6UFP (768K)
I/F
MOT FILE data→
Select the program software (VSIXXX.mot) which
was copied at item 1).
Off (default)
COM1
115200
1 Bit (default)
8 Bits (default)
None (default)
Figure 2
INF-61