Panasonic DVCPRO50 Service Manual page 71

6. Check sum is displayed upper side on the screen after the process of item 5).
7. Press "Start" button so that the following screen appears. (refer to figure 3)
8. Press "OK" to proceed software version up.
9. Confirm the bar in the Process window reaches to 100% that means the software programming complete.
(refer to figure 4)
10. Press "Exit" button to end the program.
11. Turn off and on the power of VTR in order to reboot the machine.
12. Confirm that software version is updated.
* If the error occurs during above process, repeat the process from item 7).
Figure 3
Figure 4
INF-62