Safety Instructions For Hazardous Areas - Siemens SIPROCESS GA700 Compact Operating Instructions

NOTICE
Direct sunlight
Device damage
The device can overheat or materials become brittle through the influence of UV radiation.
• Protect the device from direct sunlight.
• Make sure that the maximum permissible ambient temperature is not exceeded. For more
NOTICE
Damage to the membrane keyboard and the display
• Make sure when installing the device that the membrane keyboard and display are not
4.2

Safety instructions for hazardous areas

Vibrations at the installation location
Explosion hazard
For ignition protection type Ex ec and Ex py, vibrations of more than 5 m/s² can cause an
explosion.
• Make sure that the device is installed in a low-vibration location.
Exceeding the maximum ambient or sample gas temperature
Danger of explosion in hazardous areas and damage to devices
• Ensure that the maximum permissible ambient temperature or sample gas temperature of
Devices in explosion-proof design
Compact Operating Instructions, 01/2022, A5E35134047-11
information on this, see section "Technical specifications (Page 83)".
damaged.
WARNING
WARNING
the device is not exceeded. Refer to the information in the section "Technical specifications
(Page 83)".
4.2 Safety instructions for hazardous areas
Installing
27