Epson Stylus Photo RX600 User Manual page 102

5 Press the
screen.
6. Press the l and r buttons to move through the photos.
If your photos are upside-down or backward, re-position them in the film holder,
press the Cancel button, and start again at step 1.
7 When the photo you want to print is in the middle of the screen, press the
u or d buttons to choose the number of copies to print of that photo.
8. Press the
9. Press the u and d buttons to highlight
buttons to choose the type of paper that is loaded in the printer. (If you're not
sure about the paper type, see the table on page 91.)
Note:
It's important to select the correct Paper Type setting for the paper you're using, or
the print quality may not be what you expect.
10. Press the u and d buttons to highlight
buttons to select the size of paper you've loaded.
11. Use the u and d buttons to highlight
the l and r buttons to choose
12. To restore color from faded images, use the u and d buttons to highlight
Restoration
13. Use the u and d buttons to highlight
to select one of the following:
BorderFree
on the paper
With Border
102
Printing and Scanning Without a Computer
button. The RX600 previews and displays your photos on its
OK
Last
button.
OK
, then use the l and r buttons to choose
: One photo per sheet, borderless; fits the photo lengthwise
: One photo per sheet, with borders around the edges
First Second
Paper Type
Paper Size
Resolution
or
Photo Best Photo
, then use the l and r buttons
Layout
, then press the l and r
, then use the l and r
, then use
.
.
On